Disconnecting lan cable, Cleaning the computer, Disconnecting lan cable -27 – Toshiba Satellite 2450 User Manual

Page 97: Cleaning the computer -27

Advertising
background image

O

PERATING

B

ASICS

4-27

3.

Plug the other end of the cable into a LAN hub connector. Check with your
LAN administrator before connecting to a hub.

NOTE: When the computer is exchanging data with the LAN, the LAN
Active
indicator glows yellow. When the computer is connected to a
LAN hub but is not exchanging data, the
Link indicator glows green.

Disconnecting LAN cable

To disconnect the LAN cable, follow the steps below.

CAUTION: Make sure the LAN Active indicator (yellow LED) is out
before you disconnect the computer from the LAN.

1. Pinch the lever on the connector in the computer’s LAN jack and pull out the

connector.

2.

Disconnect the cable from the LAN hub in the same manner. Check with your
LAN administrator before disconnecting from the hub.

Cleaning the computer

To help ensure long, trouble-free operation, keep the computer free of dust and use
care with liquids around the computer.

Be careful not to spill liquids into the computer. If the computer does get wet,
turn the power off immediately and let the computer dry completely before you
turn it on again.

Clean the computer using a slightly damp (with water) cloth. You can use glass
cleaner on the display. Spray a small amount of cleaner on a soft, clean cloth
and wipe the screen gently with the cloth.

CAUTION: Never spray cleaner directly onto the computer or let liquid
run into any part of it. Never use harsh or caustic chemical products to
clean the computer.

Remove the dust from the air filter on the underside of the computer regularly
with vacuum cleaner. See Chapter 2 Grand Tour, Underside.

Cleaning the computer

Advertising