Toshiba Satellite 2450 - Manual (Page 156)

User's Manual
8-22
O
PTIONAL
D
EVICES
TV
You can connect a television set to the TV out jack on the computer. Follow the
steps below.
Using the TV button
1. Connect the TV adaptor cable’s S-Video plug to the TV out jack on the
computer.
2. Connect the TV adaptor cable’s MINI DIN 4Pin connector S-Video format on
the TV.
3. Press the TV button.
You can use the hot keys Fn + F5 to change the display device. Refer to Chapter 5,
The Keyboard .
NOTE: If a television is connected to the computer, set the TV type in
Display Properties. Follow the steps below.
a. Click start and click Control Panel.
b. Double-click the Display icon to open the Display Properties
window.
c. Click the Settings tab and click the Advanced button.
d. Click the nView Display Mode tab, click Device Settings and
click Select Output Device.
e. Select Advanced and select TV in the Device Selection
window.
f. Select the Format box and select the format that your TV supports.
Changing the resolution
When you press the TV button, the CRT resolution is also set. (The default is 1024
x 768.) If you want to change the resolution, follow the steps below.
(1) Open Display properties and select the Settings tab.
(2) Select Advanced (Figure 8-17).