Toshiba D-R160SB - Manual (Page 20)

Introduction
20 EN
Display menu
On Screen menu
Setup menus
With a disc inserted into the unit, press [DISPLAY] to
display the On-Screen Display. The menu shows
information about what is recorded on the disc.
1. Disc type and format mode
In some descriptions in this manual, only one type of
disc is indicated as an example.
2. Position number of the programme
3. Recording mode and remaining time
4. Title number, chapter number and the elapsed
time of disc playback
5. Each icon means:
6. Status of the current disc
Press [SETUP] to display the Setup menu, then press
[ENTER] to display each menu, using [K / L].
These menus provide entries to all main functions of the
unit.
1. Required Setting:
To set up the required setting.
2. Playback:
To set up the unit to play discs as you prefer.
3. Display:
To set up the screen and the front display of the unit
as you prefer.
4. Recording:
To set up the unit to record on discs as you prefer.
5. Clock:
To set up the clock of the unit as you need.
6. Channel:
To adjust the channel setting of the unit as you
prefer.
7. Disc / CD Playback Mode:
When a DVD-Video disc (commercially available)
or a new DVD-R disc is inserted into the unit,
you cannot select “Disc”.
“CD Playback Mode” is available only when an
Audio CD disc or a CD-R/RW disc with MP3 / JPEG
files is inserted into the unit.
DVD-R 1 1 0:00:00
XP 1:01
P08
Video mode
1 4
5 2 5 2
3 6 3
This unit uses the following On Screen menu for most operations: Setup menu, Title list, Playlist, Original and Display
menu. They allow you to change the playing status of disc during playback.
The Display menu also gives you information on the status of the disc.
: Search
: Audio
: Subtitle
: Angle (except VR mode)
: Repeat
: Marker
: Noise Reduction
: Zoom
: Surround
Setup
Playback
Display
Recording
Clock
Channel
Disc
Required Setting 1
2
3
4
5
6
7 1
2
3
4
5
6
7