Toshiba D-R160SB - Manual (Page 39)

Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
Others
39 EN
4
Select “Format Mode” using [K / L], then
press [ENTER].
“Video mode” has been selected as the default.
5
Select “Video mode” or “VR mode” using
[K / L], then press [ENTER].
The recording format will be set.
6
Press [SETUP] to exit.
7
Insert a blank disc.
Formatting will start.
8
Formatting is complete.
“100%” is indicated.
Format - Format Mode
VR mode
Video mode
Video mode
DVD Player Compatibility mode.
VR mode
Editing possibility mode.
Format
Format Mode Video mode
Start
Notes
• The recording format setting is effective only for DVD-RW discs. You cannot change the recording format for a DVD-R disc.
DVD-R discs are always in Video mode.
• You cannot mix two formats on one DVD-RW disc. If you insert a disc that has been recorded before, the recording
format cannot be changed even if you change it in the Setup menu.
• If a blank DVD+R or DVD+RW disc is inserted, the error message “Disc Error” will appear.