Setting the clock, 31 en, Auto clock setting – Toshiba D-R160SB User Manual

Page 31: Manual clock setting

Advertising
background image

Recording

Playback

Editing

Introduction

Connections

Basic Setup

Function Setup

Others

Basic Setup

31

EN

Setting the clock

Auto Clock Setting

Channel Tuning must be set before setting Auto Clock.

1) In stop mode, press [SETUP].

2) Select “Clock” using [K / L], then press

[ENTER].

Clock menu will appear.

3) Select “Auto Clock Setting” using [K / L], then

press [ENTER].

Option window will appear.

4) Select “ON” using [K / L], then press [ENTER].

5) Press [SETUP] to exit.

6) Press [I/y ON/STANDBY] to turn off.

The Auto Clock function is activated.
This unit will search for the time only when the

power is off. Leave the unit off for several minutes

to give it time to set the clock.

Clock

Clock Setting

Auto Clock Setting

ON

Setup

Playback

Display

Recording

Clock

Channel

Disc

Required Setting

Notes
• If you want to cancel “Auto Clock Setting”, select “OFF”

using [K / L] at step 4, and then press [ENTER].

• The default setting of “Auto Clock Setting” is “ON”.
• The clock may set itself automatically after you connect

the antenna cable to the unit and plug in the mains cable.

In this case, the current time will appear on the front panel

display.

• To set the clock automatically, the channel assigned to

“P04” must receive the PDC signal.

• The clock cannot be set automatically if you are not

receiving a channel in your area that carries a time signal.

In this case, set the clock manually.

• Once the auto clock setting is performed, the unit will

correct the current time by receiving PDC broadcasts

whenever you turn off the unit.

• The unit will correct the current time automatically at 8:00,

if the unit power is turned off.

• Between 23:00 and 1:00, the Auto Clock function will not

operate even if the unit power is turned off.

Manual Clock Setting

1) In stop mode, press [SETUP].

2) Select “Clock” using [K / L], then press

[ENTER].

Clock menu will appear.

3) Select “Clock Setting” using [K / L], then press

[ENTER].

Clock Setting menu will appear.
Press [ENTER] again.
Default date will appear.

Clock

Clock Setting

Auto Clock Setting

ON

Setup

Playback

Display

Recording

Clock

Channel

Disc

Required Setting

Advertising