Setting the dial mode, Installation – Toshiba SX-2981 User Manual
Page 14
Advertising
![background image](/manuals/211927/14/background.png)
14
INSTALLATION
Preparation
Before using the Handset, make sure to read the following instructions.
SETTING THE DIAL MODE
Depending on your dialing system, set the mode as follows:
1
Press and hold
until you hear a confirmation tone.
2
To set the dial mode for
pulse dialing, press
. Or to set
the dial mode for tone
dialing press
.
A confirmation tone
sounds to indicate the
setting is complete.
TONE/
PULSE
/
FLASH
Dial Mode:Pulse
Tone - Press
Pulse - Press #
Dial Mode:Tone
Tone - Press
Pulse - Press #
Tone Dialing
Pulse Dialing
PULSE
/
TONE/
FLASH
SELECT
FUNCTION
PULSE
/
TONE/
SX-2981.qx 6/18/1 3:11 PM Page 14
Advertising