Setting number of rings and the recording time, Using the menu mode – Toshiba SX-2981 User Manual

Page 40

Advertising
background image

40

USING THE MENU MODE

Answering System

SETTING THE NUMBER OF RINGS

Select one of four ring time settings (

: 2 rings,

: 4 rings,

: 6 rings,

: Toll Saver).

1

Press five

times.

The current ring time is displayed on the LED display.

2

Press

to change the ring time.

3

Press

or

or until the desired ring time

appears (

: 2 rings,

: 4 rings,

: 6 rings,

: Toll Saver).

4

Press

to set the new ring time.

The answering machine announces the ring time that you
have set.

TS (TOLL SAVER MODE):

The phone answers at the second ring

when there are new messages, and the fourth ring when there are no
new messages.
When you check the message from the outside phone, hang up if you
hear the third ring to save the toll charge.

SETTING THE RECORDING TIME

Select one of two maximum recording times or Announce Only (

: 1

minute, :

4

minutes, :

Announce

only).

1

Press six

times.

The LED display shows the current recording time.

2

Press

to change the recording time.

3

Press

or

until the desired time appears

(

: 1 minute,

: 4

minutes, :

Announce

only).

4

Press

to set the new recording time.

The system announces the recording time that you have set.

A (Announce Only): If you set the recording time to A, the selected
greeting message will be announced and no incoming message will be
accepted. The LED display shows "

".

SET

SELECT

SELECT

SET

MENU

SET

SELECT

SELECT

SET

MENU

SX-2981.qx 6/18/1 3:11 PM Page 40

Advertising