General setting, 85 en 85 en, Playback (cont’d) – Toshiba DR420KU User Manual

Page 85

Advertising
background image

85

EN

85

EN

Disc

Management

Recording

Playback

Introduction

Connections

Basic Setup

Editing

Function Setup

Others

GENERAL SETTING

2

Audio Out

Choose the appropriate audio setting for your external device.

It will only affect a disc playback.

Use [K / L] to select a desired item, then press [ENTER].

Audio Out

Dynamic Range Control
PCM
Dolby Digital
DTS

A
B
C
D

A

Dynamic Range Control (Default : ON)

Set to “ON” to compress the range between soft and loud sounds.

Use [K / L] to select a setting, then press [ENTER].

Dynamic Range Control

ON
OFF

Your setting will be activated.

Note

• Dynamic range control function is available only on

the discs which are recorded in the Dolby Digital
format.

B

Settings for PCM (Default : 48kHz)

Use [K / L] to select a setting, then press [ENTER].

PCM

48kHz
96kHz

Your setting will be activated.

48kHz : If your amplifier/decoder is NOT compatible

with 96kHz PCM, select “48kHz”. 96kHz sound
will be output in 48kHz.

96kHz : If your amplifier/decoder is compatible with

96kHz PCM, select “96kHz”. 96kHz sound will
be output.

Note

When playing back disc with copyright protection
• Even if you select “96kHz”, the sound will be down

sampled at 48kHz.

C

Settings for Dolby Digital (Default : Stream)

Use [K / L] to select a setting, then press [ENTER].

Dolby Digital

PCM
Stream

Your setting will be activated.

PCM

: Converts the Dolby Digital into PCM (2 channel).

When your amplifier/decoder is NOT
compatible with Dolby Digital, set to “PCM”.

Stream : Outputs Dolby Digital signals.

When your amplifier/decoder is compatible
with Dolby Digital, set to “Stream”.

D

Settings for DTS (Default : ON)

Select a setting using [K / L], then press [ENTER].

DTS

ON
OFF

Your setting is activated.

ON : Outputs DTS signals.

If your amplifier / decoder is compatible with
DTS, set to “ON”.

OFF :

No DTS signal is output.
If your amplifier / decoder is NOT compatible
with DTS, set to “OFF”.

Playback (cont’d)

E7PCAUD_DR420KU_EN.indd 85

E7PCAUD_DR420KU_EN.indd 85

2/6/2009 10:56:00 AM

2/6/2009 10:56:00 AM

Advertising