Toshiba DR420KU - Manual (Page 91)

91 EN 91 EN
Disc
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
Others
1 Press [SETUP] in stop mode and use
[K / L] to select “General Setting”,
then press [ENTER].
2 Use [K / L] to select “HDMI”, then
press [ENTER].
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset All
• You cannot select HDMI when an HDMI cable is
not connected and the item is shown in grey
color.
3 Use [K / L] to select a desired item,
then press [ENTER].
Format
HDMI Audio
RGB Range
HDMI CEC 1
2
3
4
• You cannot select 1 through 3 when an
HDMI cable is not connected (the items will be
shown in grey).
4 When you finish with the setting,
press [SETUP] to exit.
1
Format (Default : RGB)
You can select the color space for HDMI output.
Set the appropriate color space for your display device.
Use [K / L] to select a setting, then press [ENTER].
• When the connected device is not compatible with the
Y/Cb/Cr, HDMI signal is output as RGB regardless of the
setting.
Format
RGB
YCbCr
Your setting will be activated.
HDMI
GENERAL SETTING
SE-R0265
OPEN/
CLOSE
INPUT
SELECT HDMI
.@/: ABC
GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIO
TOP MENU
CLEAR RETURN
MENU/LIST
WXYZ
JKL MNO
DEF
ENTER
SKIP REV
PLAY
REC MODE ZOOM REC REPEAT
PAUSE
TIME SLIP 1.3x / 0.8x PLAY INSTANT SKIP
STOP
FWD SKIP
TIMER
PROG.
SATELLITE
LINK
ENTER
SETUP
E7PCAUD_DR420KU_EN.indd 91 E7PCAUD_DR420KU_EN.indd 91 2/6/2009 10:56:02 AM 2/6/2009 10:56:02 AM