Toshiba EO1-11099 - Manual (Page 137)

– 57 –
EO1-11113
LB unit kg unit
1: 1 LB 1 kg
9: 9 LB 9 kg
10: 1/2 LB 100 g
11: 1/4 LB Not applicable
TARE TABLE AND GENERAL UNIT WEIGHT SETTING (Submode 26)
In the PLU TABLE PROGRAMMING operation (Submode 4), some of Scale-compulsory PLUs may be
set with a Tare Table No. The actual tare weight is set to each Tare Table here. Also, the General Unit
Weight is set here so that the Unit Weight may be effective to scale items entered through departments
or PLUs without any Individual Unit Weight designation.
Any time outside a sale
Mode Lock: SET
| Tare Table No. |
1 to 9
*
[#] | Tare Weight |
0 to 999
(Unit: 1/100 LB or gram.
Example: enter 13 for 0.13 LB.)
* (For sequentially programming
tables, the Table No. specification
can be skipped.)
[AT/TL]
** Only to set the Tare
Weight
| General Unit Weight Code |
1 to 11
- - -
Repeat for other tables.
Only to set the
General Unit
Weight
NOTE: The initial value for the General Unit Weight is set to Code 1 (1 LB or 1 Kg).
ex.) To set the following:
Tare Table No. 1 with Tare Weight 0.13 LB,
General Weight 2 LB (Code 2).
Mode Lock: SET, 26 [@/FOR]
1 [ST] 13 [#] 2 [AT/TL]
P 2 6
#1 0.13LB
2LB
0037
TEC STORE
1343 PEACH DRIVE
PHONE : 87-6437
Open 8:00am to 7:00pm
Closed : every Wednesday
12-19-1994 MON #1
OPERATION
CONDITION
26 [@/FOR] [ST]
**
- - - - - -