Toshiba EO1-11099 - Manual (Page 89)

- 9 -
EO1-11113
4.3 SCALE ITEM ENTRY IN “ ” MODE
Any scale item entered in the “REG” or “MGR” mode at the time of purchase must be entered manually
(Manual Scale Entry but not Auto Scale) in the “
” mode at the time of return or cancel.
That is, for entering a scale item (once purchased) in the “ ” mode, you must read the written net weight
on the item (if any) or read the net weight in the scale display panel by placing it on the scale platter, then
enter the net weight value, manually in the procedure described as MANUAL SCALE ENTRY operation in
the OPERATOR’S GUIDE.
4.4. PROHIBITIVE OPERATIONS IN “ ” MODE
• NO-SALE ([NS])
• AUTO-SCALE (described in 4.3.)
• NO-SALE CASHING OF CHECK OR OTHER NON-CASH MEDIAS
• NO-SALE EXCHANGE from Foreign Currency to Domestic Currency, or vice versa
• LOAN
• PICK UP
• TRAINING MODE START/END
• VALIDATION PRINT
• ENDORSEMENT PRINT
• RECEIPT POST-ISSUE ([RECEIPT ISSUE])
4.5. MANAGER INTERVENTION REQUIRED STATUS,
AMOUNT LIMIT IN “ ” MODE
Since operations in the “ ” mode are performed under the manager’s control, the status requiring a
Manager Intervention and Amount Limits (described in Chapter 2) will all be released, i.e., the same handling
as in the “MGR” mode.