Toshiba MA-1595-1 Series - Manual (Page 147)

6. PROGRAMMING OPERATIONS EO1-11152
6.13 Tare Table and General Unit Weight Setting (Submode 26)
6-30
Example) Toset the following Link-PLU Table and its Sub-link PLU:
Link-PLU Table No. Sub-link PLU Code
1 101301
Key Operation: Mode Lock: SET, Enter 25 and depress the [X] key.
1
[ST] (Link-PLU Table No.)
101301 [PLU] (Sub-link PLU Code)
[AT/TL] to complete this submode
NOTE: In this example, Link-PLU Table No. has already been set in
PLU 90601 (Drink Small-A) and PLU 90701 (Drink Small-B)
as Head-link items in the PLU PROGRAMMING operation,
Submode 4. The Sub-link PLU 101301 here has been
programmed as a bottle-deposit PLU (Small-Btl Depo) in the
same submode.
Deletion of Link-PLU Tables
Any time outside a sale
Mode
Lock: SET
25 [X] [ITEM CORR] | Link-PLU Table No. | [ST] [AT/TL]
or 1 to 99
[VOID]
6.13 Tare Table and General Unit Weight Setting (Submode 26)
In the PLU TABLE PROGRAMMING operation (Submode 4), some of Scale-compulsory PLUs may be set with a
Tare Table No. The actual tare weight is set to each Tare Table here. Also, the General Unit Weight is set here
so that the Unit Weight may be effective to scale items entered through departments or PLUs without any
Individual Unit Weight designation.
Any time outside a sale
Mode
Lock: SET
• Tare Table Setting
26
[X] | Tare Table No. | [ST] | Tare Weight | [#] [AT/TL]
• General Unit Weight Setting
26
[X] | General Unit Weight Code | [AT/TL]
7(& 6725( 7(& 6725(
 3($&+ '5,9(
3+21( 
2SHQ  DP WR  SP
&ORVHG HYHU\ :HGQHVGD\
 021 
3 3
 
  70
Repeatable for other tables to be deleted.
OPERATION
CONDITION
* (For sequentially programming
tables, the Table No.
specification can be skipped.)
Repeat for other tables
1 digit (1 to 9) 0 to 999
(Unit: 1/00 LB or gram.)
(Example: enter 13 for
0.13 LB or 13 grams.)
1 to 11 ( NOTE 1 below)
OPERATION
CONDITION