Toshiba MA-1595-1 Series - Manual (Page 37)

10. REGISTERING PROCEDURE AND PRINT FORMAT EO1-11152
10.5 Department Entry
10- 4
10.5 Department Entry
Each department is preprogrammed as the “PRESET” type (with a price programmed) or “OPEN” type (with no
price programmed). Perform operation depending on the type selected.
-- Receipt Print Format --
Open Department Type
• |Price| [Open DEPT]
• |Open-Dept Code| [DP#] |Price| [AMT]
Preset Department Type
• [Preset DEPT]
• |Dept Code| [DP#]
Preset-price Open through Preset Department Type
• [PR OPEN] (or [OPEN]) |Price| [Preset DEPT]
• [PR OPEN] (or [OPEN]) |Dept Code| [DP#] |Price| [AMT]
10.6 Gasoline Entry
Enter the sale amount of gasoline. The quantity of gasoline is calculated by the preset gallon unit price.
Same as Open Department Type of DEPARTMENT ENTRY sequence using the Department Key which is
programmed as a Gasoline Sales department.
NOTES: 1. A department should be programmed with Gasoline status and unit price.
2.
The [DP#] key cannot be used for Gasoline entries.
3. The calculation result (the quantity of gasoline) will be obtained down to the 3rd digit below the
decimal point. The fraction rounding method is ruled by the option selected for the Quantity
Extension fraction rounding. (see NOTE 5 attached to QUANTITY EXTENSION section).
4. The repeat entry is unavailable to a Gasoline Sales department.
5. Gasoline sales department cannot be used as the Preset type. The sale amount of gasoline must
be entered.
6. The quantity of gasoline calculated will be not displayed but printed.
Example) DEPT 10 = Unit price 3.00 with Gasoline status
-- Receipt Print Format --
1000 [DEPT 10]
[AT/TL]
OPERATION
OPERATION
'3 '3 
'3 '3 
T: Taxable Item Symbol
F: Food Stampable Item Symbol
9(*(7$%/( 7)
 *DO # *DO
*DVROLQH 7
7$; 
&$6+