Texas Instruments CC2511 - Manual (Page 3)

CC2511 Dongle
1 Introduction
Thank you for purchasing a SmartRF
®
04DK Development Kit.
Please note that Chipcon uses the term SmartRF
®
04DK as a collective term for all
development kits on the SmartRF
®
04 platform. This development platform supports
evaluation, development and prototyping using the SmartRF
®
04 products from Chipcon.
Make sure to subscribe to Chipcon’s Developer’s Newsletter to receive information about
updates to documentation, new product releases and more. Sign up on the Chipcon web site.
2 About this manual
This manual covers the CC2511 Dongle, found in the CC2510–CC2511DK. It covers both the
CC2511 Dongle hardware and software components of the development kit.
It covers the use of CC2511 application examples.
The CC2510EM and CC2510 application examples are covered in a separate document.
SmartRF
®
Studio has its own user manual.
The Chipcon Packet Sniffer has its own user manual.
The Chipcon Flash Programmer has its own user manual.
Further background information can be found in the device datasheets.
3 Definitions
SmartRF04EB Evaluation Board. Main board with LCD, USB interface,
LEDs, pot-meter etc. Platform for the Evaluation Modules
(EM, see below).
SmartRF ® 04DK A collective term used for all development kits for the
SmartRF
®
04 platform, i.e. SmartRF04EB + EM.
CC2510EM CC2510 Evaluation Module, a small plug-in module for
SmartRF04EB, should be used as reference design for
antenna and RF layout.
CC2511 USB Dongle CC2511 Evaluation Module, a small USB dongle.
SmartRF04EB, should be used as reference design for
antenna and RF layout.
SoC System on a Chip. A collective term used to refer to
Chipcon ICs with on-chip MCU and RF transceiver. Used
in this document to reference the CC2430 and the
CC2510.
ICE In Circuit Emulator.
CC2510 application examples Application examples using only the CC2510.
CC2511 application examples Application examples using the CC2511 USB Dongle
together with a CC2510.
SWRU082 Page 3 of 24