Texas Instruments CC2511 - Manual (Page 5)

CC2511 Dongle
Figure 1 CC2511 Dongle powered from USB cable
Figure 2 CC2511 Dongle powered from SmartRF04EB
6. Turn on the power on the SmartRF04EB. See Figure 3.
Figure 3: SmartRF04EB Power switch, power on.
The CC2511 can now be programmed with the Chipcon Flash Programmer software. The
firmware on the CC2511 can also be debugged using the IAR embedded workbench
debugger.
Please see the IAR user manual and the Chipcon Flash Programmer user manual for more
details.
SWRU082 Page 5 of 24