Texas Instruments CC2511 - Manual (Page 9)

CC2511 Dongle
6 CC2511 application examples
This section describes the application examples available for the CC2511. These application
examples focus on how to use the USB on the CC2511. The examples is available both as
source code and ready-to-upload .hex files from the Chipcon website.
There are three CC2511 application examples.
• Wireless mouse / practical joke.
(HID , Human Interface Devices)
• Wireless USB to Serial port converter. (CDC, Communication Devices)
• Wireless WinAmp remote control.
(Vendor requests, custom Windows driver)
There is also a CC2510 Application Example available. This example provides valuable
information about setup and usage of different modules found in both CC2510 and CC2511.
Please see the “CC2430DK_CC2510_CC1110_User_Manual” for more information about this
Application Example.
All the application examples use the same packet format and radio frequency. This is done to
make it simple to observe the radio activity on the Chipcon General Packet Sniffer. After
installing the packet sniffer choose the “CC2511 App. Example protocol” to see the radio
traffic. Figure 8 show the packet sniffer observing radio traffic in the “Wireless USB to Serial
port converter” application example.
See the Chipcon General Packet Sniffer user manual for more information.
Figure 8: Screenshot of the Chipcon General Packet Sniffer
SWRU082 Page 9 of 24