Accessing the basic settings – Thermador CIT304GM User Manual
Page 23
Advertising
24
Accessing the basic
settings
Follow the steps below:
1.
Switch on the cooktop using the main switch
2.
Press the
PANEL LOCK symbol within the next 10 seconds until you hear a
sound signal and o b lights up on the display (see illustration).
3.
Press the
PANEL LOCK
symbol until the indicator for the required function is
displayed.
4.
Then select the required setting using the programming zone. This new setting
will be shown in the element display on the upper right-hand side.
5.
Press the
PANEL LOCK symbol again for more than 4 seconds, until you hear
a sound signal. The settings have been correctly stored.
Selecting the required
setting
Advertising
This manual is related to the following products: