Chapter installation, 1 before getting started – Toshiba 2000 User Manual
Page 31
Advertising
6F8C1111
11
2.1
Before Getting Started
2.1.1 Procedure
NOTE:
• Do not touch parts that are not necessary for the work at hand.
• Be careful not to loose the removed screws. Also be careful not to drop them inside
the device.
• If an error or malfunction occurs, contact your Toshiba service desk.
• Use drivers that is appropriate for the screw when assembling or fastening parts.
Improper driver will not fit tightly in the cross hole. Using improper driver can wear
out the cross hole of the screw.
Chapter
Installation
Advertising