Toshiba 2000 - Manual (Page 60)

Chapter 6 Hardware Setup
Computer module C2PU37 User’s Manual
40
6.1 Setting the BIOS
The method of displaying the BIOS screen and the displayed content (default value) are
shown below. Check the content before using or when there is an abnormal condition.
Important
• Do not enable the suspend function when using the WDT function. This may cause a
mal-function.
The suspend function is a power saving method and cannot be used together with
the WDT function.
(1) Turn on the main unit power.
The following BIOS startup screen appears.
PhoenixBIOS X.X Release X.X.X
Copyright 1985-2002 Phoenix Technologies Ltd.
All Rights Reserved
CPU = Pentium(R) III prosessor 500MHz
636K System RAM Passed
XXXM Extended RAM Passed
256K Cache SRAM Passed
System BIOS shadowed
Video BIOS Shadowed
UMB upper limit segment address:F0DF
Fixed Disk 0:(DISK Maker/Type)
Press <F2> to enter SETUP
BIOS startup screen