Toshiba 2000 - Manual (Page 48)

Chapter 3 Handling
Computer module C2PU37 User’s Manual
28
3.4 About the PC Card
Two PC Cards Standard TYPE I/II (3.3V, 5V) PC cards can be inserted in the PC card
slot of the C2. Or, one TYPE III PC card can be inserted when the left and right slots
are combined.
PC card slot 1 PC card slot 0
CAUTION
• Do not touch the PC card that is being used or just after it has been used. It may
become extremely hot and cause burns.
Persons with weak skin condition should be especially careful.
Important
• When using a card that requires a cable, the cable may be short. Check the location
of the main unit and the peripheral device to be connected.
• The size of a cable or a connector of a PC card are large, and may be unable to
insert two cards simultaneously. Please check the size of the card to be used etc.
beforehand. If a PC card is inserted by force, it may become the cause of incorrect
operation and failure.
Memo
• Some commercially available PC cards may emit considerable amount of heat. The
function of such card may become unstable when it is used for an extended period.
Also, if it is used together with other cards, the heat may affect the other card.
Examples of PC card
• Modem card • Flash memory
• SCSI adapter • LAN card