Toshiba 2000 - Manual (Page 61)

6.1 Setting the BIOS
6F8C1111
41
(2) Press F2 when the BIOS startup screen appears.
The BIOS main menu appears.
Phoenix BIOS Setup Utility
Main Advanced Boot Exit
Item Specific Help System Time
System Date
Legacy Diskette A:
Primary Master
Primary Slave
Secondary Master
System Memory:
Extended Memory:
Memory Cache:
[ XX:XX:XX ]
[ XX/XX/2000]
[Disabled]
[DISK
]
[None]
[None]
640 KB
XXXXXX KB
[Enabled]
F1 Help Select Item -/+ Change Values F9 Setup Defaults
Esc Exit Select Menu Enter Select Sub-Menu F10 Save and Exit
BIOS main menu screen
(3) Select each item from this main menu and check the content.
The content of each screen is as follows.
Phoenix BIOS Setup Utility
Main Advanced Boot Exit
Item Specific Help Installed O/S:
Reset Configuration Data:
PS/2 Mouse
[Other]
[No]
[Auto Detect]
I/O Device Configuration
Large Disk Access Mode:
Local Bus IDE adapter:
[Dos]
[Primary]
Advanced chipset Control
Legacy USB Support:
PCI IRQ line1:
[Enabled]
[11]
F1 Help Select Item -/+ Change Values F9 Setup Defaults
Esc Exit Select Menu Enter Select Sub-Menu F10 Save and Exit
Advanced screen