Thermador CET304FS - Manual (Page 9)

9
Single elements have only one size cooking surface.
Choose a pan that matches the size of the element.
The size of these elements can be matched to your pan size. The heating element
must be turned on.
Turning off the outer heating ribbon:
Touch PAN SIZE. The ð display will turn off.
Adding:
Touch PAN SIZE again. The ð display will turn on.
On this heating element you can turn the medium and large heating ribbons off.
The heating element must be turned on.
Turning off the outer heating ribbon:
Touch PAN SIZE. The ò display will turn off.
Turning off the middle heating ribbon:
Touch PAN SIZE again. The ð display will turn off.
When you turn the heating element on again, all of the heating ribbons will be on.
The Bridge element combines two individual heating elements into one long griddle
zone. This configuration is ideal for griddles and large pans.
Turning on the Bridge element:
Touch BRIDGE. The ø symbol will appear; both heating elements are now selected.
0 appears in both displays. Within the next 10 seconds select the desired heat
setting (1Ć9). The Bridge element and both individual heating elements are now on.
Changing the heat setting:
Touch BRIDGE or one of the two $ symbols for selecting the heating elements,
and set the new heat level within the next 10 seconds.
Turning off the Bridge element feature:
Touch BRIDGE. 0 appears in both displays. The heating elements will turn off after
about 10 seconds, and the residual heat indicator will appear.
The cooktop has a hot surface indicator for each element. It shows you which
elements are still hot. The hot surface indicator has two levels.
If an H is shown on the display, the element is still hot. You could use it, for example,
to keep a small quantity of food warm or to melt a chocolate coating.
As the element continues to cool, the display changes to h. The display goes out
once the element has cooled sufficiently.
The hot surface indicator will automatically come on after a power failure. The
display lights up for approximately 30 minutes.
The elements
Single element
Dual element
Triple element
Bridge element
Residual heat indicator