Rec mute function, Restricting the number of tracks, Copy-protection – Teac CD-RW901 User Manual
Page 30: 5 − recording
0
TASCAM CD-RW901
Rec mute function
The Rec mute function allows instant cut-off of the
input signal, and records four seconds of silence on the
disc.
While recording is in progress, press the
REC MUTE
key on the remote control.
The display shows the
Rec Mute
flashing, the meters stop
displaying the current level and the monitored sound is
cut.
After about four seconds, the unit enters record ready
mode.
NOTE
This function is only available from the remote con-
trol unit.
Restricting the number of tracks
When making a recording, it is possible to restrict the
number of tracks that nay be recorded at one time.
At any time within record or record ready mode, turn
the
MULTI JOG
dial to display the track numbers you
want to record.
The maximum number that can be entered is 99 tracks.
Copy-protection
The CD-RW901 allows copy-protection to be applied
to the discs produced. Naturally, the copy-protection
applies only to digital-to-digital copies.
There are three settings:
FREE (may be freely copied), where no copy-pro-
tection is applied to the recorded disc.
1GEN (single-generation copying), where one digital
copy (“child”) can be made from the recorded disc,
but no digital copies (“grandchildren”) can be made
from the child.
PROH (copy prohibited) which prevents any digital
copies being made from the recorded disc.
Origin (SCMS:Serial Copy Management system)
which applies CCI (Copy Control Information) to the
recorded disc.
Use the COPY ID option in the REC sub-menu to set
the function on (see “
Operation basics” on page 16).
Turn the
MULTI JOG
dial to select the desired settings.
•
•
•
•
NOTE
Copy-protection applies on a “per-track”, not a per-
disc basis. This means that you can apply different
copy-protection levels to different tracks (but you
can’t apply different copy-protection levels to dif-
ferent parts of the same track). If copy-protection is
important to your work, you may want to check this
setting every time you make a recording, to ensure
that you have the protection level that you want.
5 − Recording