Teac CD-RW901 - Manual (Page 6)


TASCAM CD-RW901
Rack-mounting the unit
If you are mounting the unit in a rack, leave 1U of space
above it and 4 inch (10 cm) or more of space at the rear.
Use the rack-mounting kit to mount the unit in a stan-
dard 19-inch equipment rack, as shown in this section.
Remove the feet of the unit before mounting.
Thank you for your purchase of the TASCAM
CD-RW901 CD rewritable recorder.
Before connecting and using the unit, please take
time to read this manual thoroughly to ensure you
understand how to properly set up and connect the
CD-RW901, as well as the operation of its many useful
and convenient functions. After you have finished read-
ing this manual, please keep it in a safe place for future
reference.
NOTE
This product is designed to help you record and
reproduce sound works to which you own the copy-
right, or where you have obtained permission from
the copyright holder or the rightful licensor. Unless
you own the copyright, or have obtained the ap-
propriate permission from the copyright holder or
the rightful licensor, your unauthorized recording,
reproduction or distribution thereof may result in
severe criminal penalties under copyright laws and
international copyright treaties. If you are uncertain
about your rights, contact your legal advisor. Under
no circumstances will TEAC Corporation be re-
sponsible for the consequences of any illegal copy-
ing performed using the CD-RW901.
About this manual
In this manual, we use the following conventions:
The names of keys and controls are given in the fol-
lowing typeface:
ERASE .
When the alphanumeric portion of the display shows
a message, this is shown in the following typeface:
Complete .
•
•
If a preset indicator in the display (i.e. one which
cannot change, but is either on or off) is shown, this
is shown as follows:
RANDOM .
Selectable value (i.e. values of dB) or ON and OFF
selection (i.e. SRC>XXX) is shown in the following
typface:
XXX .
•
•
Supplied accessories
In addition to this manual, the CD-RW901 has been
packed with the following:
• RC-RW901 remote control unit ................................ 1
• AC power cable ......................................................... 1
• A rack-mounting screw kit (screws and washers) ..... 1
• A waranty card .......................................................... 1
Contact your TASCAM supplier if any of these items
are missing.
1 − Introduction