Toshiba RD-XS55KU - Manual (Page 146)

146
Network Navi
LAN(10/100)
Regarding the cable used:
• When connecting directly to this
recorder, use the included LAN
crossover cable.
• When connecting using a router,
use a commercially available LAN
straight cable (category 5/CAT5).
While pressing down
Direct connection to a PC
Crossover cable
To LAN (Ether) port
Connecting to a PC using a router (e.g. ADSL)
To LAN (Ether) port
Straight cable
ADSL modem
(Router, internal type)
Phone line Phone line
To LAN (Ether) port
To LAN (Ether) port
To LAN (Ether) port
Router ADSL modem
Back view of the recorder
To LAN(10/100) port
Caution
• When plugging or unplugging the LAN cable, switch off the power of the recorder
and the PC.
• When plugging or unplugging the LAN cable, hold the plug portion of the cable.
• When unplugging, do not pull on the LAN cable but unplug while pressing down on
the lock.
• Do not connect the modular phone cable to the LAN port.
• Since there are various connection configurations, please follow the specifications of
your telecommunication carrier or internet service provider.
Plug
Lock portion
Preparation for Network Navi (Continued)
RD-XS55SU_Ope_E_p141-170 06.3.20, 4:16 PM 146