Toshiba RD-XS55KU - Manual (Page 184)

184
Aspect ratio(Video mode)
DVD-RW DVD-R
To set the aspect ratio when recording onto a DVD-R/RW
disc.
4:3:
Fixes the aspect ratio at 4:3.
16:9:
Fixes the aspect ratio at 16:9.
Note
• When the bit rate on “User record quality” is set to
“1.0(Mbps)” and “1.4(Mbps)”, pictures are recorded in 4:3
aspect ratio even if “16:9” is selected.
DVD compatible mode
DVD-R DVD-RW HDD DVD-RAM
To set whether or not recording is to be performed in the
format for which recording is allowed by the DVD-Video
standard (video, audio and other data) during recording.
This selection is important for contents when recorded on
this recorder, if they will be copied to DVD-R/RW.
Off:
For recording of contents which will not be copied to a
DVD-R/RW disc.
Both the main and SAP sounds are recorded.
When recording directly on a DVD-R/RW disc, this is
ineffective. The recorder will automatically regard this
as “Main,” and record sound of the main channel only
in stereo. Select “Main” or “SAP” for DVD-R/RW
recording.
Main:
Records sound of the main channel only in stereo.
SAP:
Records sound of the SAP channel only in stereo.
Notes
• When you select the manual rate of the picture quality
between 3.0 and 3.8 and set this mode to “Main” or “SAP”,
the picture quality may become lower than when you set
this mode to “Off”.
• You can change the setting from Quick Menu.
• It is no use to make this selection when dubbing. Select
when recording.
Customizing the function settings (Continued)
Function setup
Picture record mode
DVD-R DVD-RW HDD DVD-RAM
Adjusts problems with the brightness of video signals of
TV broadcasts or other external input.
Press / buttons to select the source, and / buttons
to select the mode.
(Only use this setting when you cannot adjust the
brightness satisfactorily with the Custom picture setting in
Picture/Audio settings (
page 179) of this recorder.)
Important:
• This setting changes the video signal to record and the
recorded signal is not returned to the original state even
when this setting is changed after recording. When
duplicating from a VHS tape, if you can check the video
recording state beforehand, we recommend first playing
back for a while and checking the overall brightness
tendency, then setting an appropriate mode.
Standard:
The brightness of signals received with this recorder
and external input signals are adjusted automatically.
This is normally the setting to use.
Mode 1:
This setting is used to record the signals darker when
the screen is too bright.
Mode 2, 3, 4:
As the number rises, the signals are recorded brighter.
Use these modes to adjust the brightness.
Input Black level
DVD-R DVD-RW HDD DVD-RAM
You can adjust the black level of the input signal.
Standard:
Normal black level.
Enhanced:
Brighter black level than in “Standard” setting.
RD-XS55SU_Ope_E_p171-188 06.3.20, 4:16 PM 184