Toshiba RD-XS55KU - Manual (Page 183)

183
Librar
y
Function setup
Editing
Pla
ybac
k
Recording
Intr
oduction
Netw
ork Na
vi
Other
s
DVD recorder operation
User record quality
DVD-R DVD-RW HDD DVD-RAM
You can select from 5 combined picture and sound
quality recording settings prior to actual recording.
Actual selection applied becomes the default setting for
normal recording or programmed recording.
• To make a combination of picture and sound
quality settings.
1) Press / / / buttons to select the desired
item (“Mode”, “Rate”, or “Audio quality”).
2) Press ADJUST button to change the setting of
each item.
• To apply the combination of picture and sound
quality settings.
1) Press / / / buttons to select a media to
record on (HDD or DVD).
2) Press ADJUST button to change the setting.
You can confirm the available recording time for
the selected setting on the bottom screen.
3) Press ENTER button.
Notes
• A combination of picture and sound quality settings can be
set for the HDD and a DVD-RAM disc respectively.
• You can change the combination of picture and sound
quality settings also by displaying Quick Menu on LIBRARY
MENU or in stop mode, then selecting “User record
quality”. Either of the above methods updates the setting of
this recorder.
• If you set “SP” or “LP”, you cannot select “L-PCM”.
• Depending on the sound quality settings, the upper limit for
the picture quality setting differs.
• You can adjust the manual rate for picture quality by
0.2 Mbps from 2.0 to 9.2. (You cannot set the rate from 1.0
to 2.0.)
Instant replay interval
DVD-VIDEO VCD CD DVD-R DVD-RW HDD DVD-RAM
Sets how far back is replayed when INSTANT REPLAY
button is pressed.
5 sec. : 10 sec. : 30 sec. : 5 min.
Title thumbnail point
DVD-R DVD-RW HDD DVD-RAM
For recorded titles, sets how far a scene from the start is
set as the title thumbnail.
0 sec. : 3 sec. : 10 sec. : 35 sec. : 1 min. : 5 min.
Note
• Thumbnails can also be changed to other scenes.
See page 126.
HDD/RAM title play
HDD DVD-RAM
Sets the resume play per title.
Title resume:
Remembers the point where you stop playback.
Allows you to resume the playback from that point.
Serial playback:
You can play back titles (Original, Playlist) stored in
the HDD or a DVD-RAM continuously.
Because there is no division between titles, the
recorder remembers only the last point where you
stopped playback.
Still group interval
DVD-RAM
Sets an interval for display of still pictures (in seconds)
when playing back a collection of still images.
1 sec. : 2 sec. : 3 sec. : 5 sec. : 10 sec. : Default
Priority contents
To select the playback priority between JPEG (picture)
files and MP3/WMA (audio) files.
Photo: JPEG files take priority over MP3/WMA files.
Audio: MP3/WMA files take priority over JPEG files.
Note
• If this selection does not correspond to disc contents, the
recorder will take a longer time to start playback of the disc.
SETUP
e.g.
HDD DVD
Custom setting
Setting
Total recording time: approx. 71min.
(with 4.7 GB unused)
Manual 6.6
Mode Rate Audio quality
Manual 1
2
3
4
5
Setting 1 – – –
L-PCM
D/M1 SP
LP
Manual
Manual
6.6
4.6
2.2
6.0
3.2
SP 4.6 D/M1 L-PCM
D/M1
D/M2
D/M1
User record quality
RD-XS55SU_Ope_E_p171-188 06.3.20, 4:16 PM 183