Toshiba RD-XS55KU - Manual (Page 168)

168
Network Navi
Network Navi features (Continued)
Setting a timer recording using email
You can remotely set a timer recording using email.
Preparation
• Connect the recorder to the internet, and turn on the power of each equipment.
• Set the “Mail Setting” under “Network Setting”.
• Change the mail software setting to text format. (Timer recording setting by email is not compatible with email in
HTML format.)
• A trial run of timer recording setting by email is recommended to test its operation before an actual run.
Notes
• Depending on the software for sending timer recording
setting email, a part of the first line may go to a new line if
it is long. If this occurs, timer recording setting content will
not be read correctly.
• If there is an excessively large number of email messages
on the mail server, the timer recording setting email may
not be received.
• When the recorder does not have an always-on internet
connection, timer recording setting using email cannot be
done.
• In some cases, a timer recording might not be possible
depending on the start time of the timer recording and the
recorder’s operating mode.
• An email account compatible with POP3 or APOP is
required as a destination of timer recording setting email.
You cannot use an account such as a cell phone email
address in which you cannot send or receive email from
your home PC.
• If you receive email using a PC which is set to
automatically delete email from the mail server, the
recorder may not receive the timer recording setting email.
• Only one timer recording setting can be done per email.
• If an email message begins with the same format as the
timer recording setting email, it may be regarded as a timer
recording setting email and may be received by the
recorder instead of the PC.
• If the email timer recording keyword is entered incorrectly,
you will not be able to set a timer recording. In addition, if a
symbol is part of the email timer recording keyword, it will
cause an error. Therefore, you will not be able to set a
timer recording.
No.
1
2
3
4
5
6
7
8
9
10
Category
Header
Keyword
Description
Description
Date(Month/Day/Year)
Start time (0100-1259)
End time (0100-1259)
Program CH
Recording Quality
Media
Character
open
(same keyword from Setup
menu)
prog
add
mmddyyyy
hhmmam/hhmmpm
hhmmam/hhmmpm
TV
CATV
C.BOX
Satellite box
Line in
SP
SP-Audio
MP
LP
EP
SEP
EXP
EXP-Audio
XP
XP-Audio
User
HDD
DVD
2–69
CAT1–125
CBX0–999
SAT0–9999 *
L1, L2, L3
SP
SPA
MP
LP
EP
SEP
EXP
EXPA
XP
XPA
User
SH
SD
Setting a timer recording by directly specifying the date, time, and channel
1 Enter the email destination (To:).
Enter the “Sender Address” that was set in “Mail Setting”.
e.g. [email protected]
2 Enter the content of a timer recording in the body of the email.
Enter text in single-byte letters. (Both capitalized and non-capitalized letters can be used.)
Enter a space between each item.
e.g. open rdstyle prog add 04012006 1100am 0130pm CAT125 SP SH
l l l l l l l l l l
1 2 3 4 5 6 7 8 9 10
• Toshiba is not responsible for any damage or loss caused directly or indirectly by the failure of the recorder to record
content intended to be recorded.
• Toshiba is not responsible for, nor has any control over, any content recorded and/or viewed using the recorder.
The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is
prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.
* * Omissible.
When not specified, the recorder selects “HDD”
as the recording media, “SP” as the recording
quality. For the other recording settings, the
setup menus are referred to.
* Input by 3 or 4 digits according to the setting ( page 44,
INSTALLATION GUIDE). If not, the timer recording will not
be executed.
RD-XS55SU_Ope_E_p141-170 06.3.20, 4:16 PM 168