Tyco Electronics P5200 - Manual (Page 116)

MM23772, Rev. F
116
Table 11-6: Information Display
PRS - NAME
XXXXXXXX
Personality Name
EEPR SIZ EEPROM Size
RAM SIZ RAM Size
FLSH SIZ Flash Size
RF BAND Frequency Band
HSD RATE Data Transfer Rate
PRS VER Software Version
DSP_ _RAM DSP Software Version
FLSH - VER FLASH Software
r - released, 01A - revision state
M/A-COM
(C) – 2004
Copyright
11.17 RECEIVE A CALL
1. Select desired conventional system and channel or turn scan ON and make sure desired channel is in
scan list.
2. When the radio receives a call, the radio will unmute and the channel name will appear in the display.
11.18 TRANSMIT A CALL
1. Select desired system and channel.
2. Ensure the channel is not busy by pressing the  button momentarily. If audio is heard or if the
icon is on, the channel is busy.
3. When sure that the channel is not busy, press the Push-To-Talk button and speak into the microphone.