Tyco Electronics P5200 User Manual

Page 36

Advertising
background image

MM23772, Rev. F

36

MESSAGE DESCRIPTION

BAD VID

Invalid voice user ID. Check User ID. If correct, contact your system administrator.

HOM DWN

The Home VNIC is down. Retry. If error continues, contact your system
administrator.

SRV BSY

The serving VNIC is busy (congested).

MAX USR

The maximum number of users are already registered with the specified user ID.
OpenSky allows one User ID to log onto the network using up to three different
radios. Use *0## command or power down one of the other radios to de-register the
radio.

NAS BSY

The system cannot provision MES because of an administrative process.

NOAUTHM

The MES failed voice mutual authentication. If a valid radio displays this error,
contact TAC (see Section 12).

NOSUPRT

The MES cannot support the required provision. If condition persists in strong signal
conditions, contact your system administrator.

NOAUTHV

VNIC does not support or failed mutual authentication. If condition persists in strong
signal conditions, contact your system administrator.

PLS LOGIN

If enabled and authorized for encryption (P7200 only), the radio requires the user to
enter a User ID and password. Login with keypad.

BAD PWD

An invalid password has been entered. Verify the password and re-enter.

OVER_TEMP

The radio may be too hot. The radio will cease transmitting if it exceeds an
operational temperature threshold. Let the radio cool before attempting to transmit.
Report this failure to authorized technician.

No App

ECP mode is unavailable (not programmed).

NO PRIV

Missing required privilege.

NO SYNC

No forward-channel sync (weak or no coverage). If condition persists in strong signal
conditions, contact your system administrator.

No Access

Incoming encrypted voice cannot be decrypted. If condition persists in strong signal
conditions, contact your system administrator.

Dead battery

Radio must shutdown because battery charge is critically low.

NO REG

Not registered with MDIS, VNIC, or both.

DISABLED

Function disabled (e.g., function invalid in current context).

Advertising
This manual is related to the following products: