Tyco Electronics P5200 - Manual (Page 33)

MM23772, Rev. F
33
8.11 BASIC MENU STRUCTURE
Table 8-4 illustrates the basic P7200 and P5200 OpenSky menu structure. Menu items will vary
depending upon system programming, radio hardware, and optional configurations. All menus except the
dwell display menu can be turned off by network administration personnel. Scroll through available menu
options using the  or  buttons.
To traverse the menu options with a P7230 Select Model radio, press  or  to
scroll through menus. Press and hold  to enter options mode. Press  or  to
scroll through available options using  or  . Press and hold  to select option.
Table 8-4: Basic P7200 and P5200 OpenSky Menu Structure
MENU
NAME RADIO
DISPLAYS
USAGE NOTES
To/From Dwell
Display
 
Engineering
Display
bit-error rates
and RSSI data
Displays radio system connection data. For engineering use.
 
Silent
Emergency
“SilentEmerg” Use  or  to toggle between OFF/ON. Press  to enable.
 
Operating Mode “App Mode”
Use  or  to choose an available mode ( OTP, OCF, or ECP) . Press  and confirm
(Y/N) with  or  and  again.
 
GPS Fix “GPS”
GPS latitude and longitude position of currently tuned-to base station [“GPS (Site)”] or
V-TAC (“GPS”) scrolls across top line of the display. “GPS (Aged)” indicates VTAC
coordinates haven’t been updated for more that 2 minutes.
 
User ID “User ID” User’s identification/name scrolls across top line of the display (if programmed).
 
IP Address “IP Address” Radio’s Internet Protocol (IP) address scrolls across top line of the display.
 
Station
Identification
“Station ID” Station’s identification/name scrolls across top line of the display (if programmed).
 
Stealth Mode
(display backlight
is disabled)
“StealthMenu”
Use  or  to turn Stealth Mode “On” or “Off.” See Section 8.17 for more
information about Stealth Mode.
 
Treble Level “Treble Menu”
Use  or  to choose speaker treble level (LOW, MEDIUM, MEDHIGH, or HIGH).
Press  to return to dwell display.
 
Display
Brightness
“Bright Menu” Use  or  to brighten or dim backlighting. Press  to return to dwell display.
 
Side Tone Level “Side Menu”
Use  or  to choose side tone level (OFF, LOW, MED, or HIGH). Press  to
return to dwell display.
 
See Next Page