Vitek VT-1653 - Manual (Page 6)

6
Let’s say you want to cook in combination
mode 1 for 25 minutes:
1. Press the ”Grill/Combi” button twice.
2. Rotate the “Menu/Time” dial to set the cook
time of “25:00”.
3. Press the ”Start” button.
- combination C-2 (55% microwave cooking
+ 45% grill) – recommended for preparing
puddings, omelets, baked potatoes and
homemade pizza.
Let’s say you want to cook in combination
mode 2 for 12 minutes:
1. Press the ”Grill/Combi” button three times.
2. Rotate the “Menu/Time” dial to set the cook
time of “12:00”.
3. Press the ”Start” button.
Automatic menu
This function allows you to choose a
preprogrammed cooking mode. You need only
select the food code and weight, then press the
”Start” button.
Example: Rice, 100 g.
1. Press the “Menu” button.
2. Rotate the “Menu/Time” dial until the word
“Rice” appears on the screen.
3. Press the “Weight Adj” button.
4. Rotate the “Menu/Time” dial to select the
food weight - “0.100”.
5. Press the ”Start” button.
Automatic defrost
You need only enter the weight of the food,
from 100 to 4000 g., that you want to defrost
(meat, poultry, seafood), the oven will
determine the needed program and
automatically defrost the food.
Example: let’s say you want to defrost 600 g. of
shrimp. To do this:
1. Press the “Menu” button.
2. Rotate the “Menu/Time” dial until the word
“Fish” is displayed on the screen.
3. Press the “Weight Adj” button.
4. Rotate the “Menu/Time” dial to set the food
weight - “0.600”.
5. Press the ”Start” button.
Setting the cooking program
You can program every aspect of the cooking
process. For example, if you want to:
1. Defrost some food.
2. Set a particular power level.
3. Cook the food using the grill.
To do this:
I. 1. Press the “Menu” button.
2. Rotate the “Menu/Time” dial until the
display shows the needed function (defrost).
3. Press the “Weight Adj” button.
4. Rotate the “Menu/Time” dial to select the
food’s weight.
II. 1. Press the ”Power” button to choose the
desired power level
2. Rotate the “Menu/Time” dial to set the
cook time.
III. 1. Press the ”Grill/Combi” button
2. Set the desired cooking parameters for
food preparation in “Grill” mode.
IV. Press the ”Start” button.
Note: During the program cooking process, the
display will show the indication “1S,” “2S” or
“3S,” depending on which part of the cooking
process is currently running. When the cooking
program has finished, 6 signals audible signals
will sound.
Setting the auto-start time
Let’s say you want the cooking process to start
at 11:30 at 50% power level:
1. Press the ”Clock/Pre-set” button.
2. Rotate the “Menu/Time” dial until the
display shows the number ”11”.
3. Rotate the “Menu/Time” dial until the
display shows the number ”30”.
5. Press the ”Power” button 3 times to set the
power level to 50%.
6. Rotate the “Menu/Time” dial to select the
cooking time.
Note: make sure that the correct current time
was set previously.
When the settings are complete, the “PRE-
SET” indicator will blink while waiting for the
programmed time. At 11:30, the cooking
process will begin according to the set
program.
Quick cook
Fast heating of prepared meals at 100% power
level (from 5 to 90 sec.). To use this function
simply set the desired cooking time by rotating
the “Menu/Time” dial and pressing ”Start”.
For example: you want to heat a meal for 2
minutes. To do this:
ENGLISH
Vt-1653.qxp 04.02.2005 10:10 Page 6