Toshiba 6100 - Manual (Page 111)

O
PERATING
B
ASICS
4-17
Using the switch
To select a network device, follow the steps below.
1. a. In Windows XP, click start , point to All Programs , click Network
Device Switch .
b. In Windows 2000, click start , point to Programs , click Network
Device Switch .
2. Left-click the Network Device Switch icon on the Task bar to display a
device menu.
Figure 4-14 Sample of a network device menu (left click)
3. Click the network device you want to enable. A check will appear beside the
enabled devices. Devices without checks are disabled.
Auto Switch menu
Right-click the Network Device Switch icon to display the Auto Switch menu.
Figure 4-15 Auto Switch menu (right click)
Auto Switch
When Auto Switch is selected, this application automatically enables the wireless
LAN device when you disconnect the LAN cable. This feature works only if a wired
LAN device is currently enabled and the LAN uses TCP/IP protocol.
LAN