Toshiba 6100 - Manual (Page 168)

8-14
User’s Manual
O
PTIONAL
D
EVICES
The following ports and accessories are available on the Port Replicator.
◆ One RJ45 LAN jack
◆ One RJ11 Modem jack
◆ External monitor port
◆
Parallel port
◆ Serial port
◆ PS/2 mouse port
◆ PS/2 keyboard port
◆ DC IN socket
◆ Security lock slot
◆ Audio line-in, line-out jacks
◆ Universal Serial Bus (two) ports
◆ i.LINK (IEEE 1394) port (This port is not supported by the computer.)
◆ DVI port (This port is not supported by the computer.)
NOTES: 1. When a Port Replicator is connected to the computer,
remove all cables connected to the computer.
2. The Satellite Pro 6100 does not support the DVI and
i.LINK ports on the Port Replicator.
Parallel printer
You can connect any standard Centronics-compatible parallel printer to your
computer. All you need is an IBM PC™ parallel printer cable. Your dealer can
supply one or you can purchase one at most computer stores.
The cable’s connectors are designed so that it is impossible for you to connect
them incorrectly. You can also connect a parallel printer to an optional Advanced
Port Replicator. To connect a printer, follow these steps:
1. Turn off the computer.
2. Insert one end of the cable into the computer’s parallel port.
3. Tighten the screws that fasten the cable connector to the computer’s parallel
port.
4. Insert the other end of the cable into the printer’s parallel connector.
5. Fasten the connector to the printer with the clips on the parallel port.