Teledyne 6712SR User Manual
Page 88
6712SR Refrigerated Sampler
Section 4 Standard Programming
4-34
13
ROUND PIPE
DIAMETER = 2.00 ft
Enter the diameter of the round pipe. Press
↵
.
14
CURRENT LEVEL IS
__.__ ft
ADJUST LEVEL TO
__.__ ft
The current level will be displayed. Enter an adjustment if needed. If the
adjustment is different by more than 0.50 ft, you will be prompted “
ARE
YOU
SURE
?
YES
NO
” Choose
NO
to re-enter; select
YES
if correct. Press
↵
.
15
ZERO LEVEL OFFSET:
_.___ ft
Enter the amount of zero level offset. Press
↵
.
16
MAXIMUM DEPTH FOR
VELOCITY MEASUREMENT
2” 3” 4”
(This screen is applicable for standard-sized probes only.)
Select the maximum depth for the velocity measurement. Press
↵
.
17
NUMBER OF BOTTLES:
1 2 4 8 12 24
Select the number of bottles in your bottle kit by pressing either arrow key
until the correct number blinks. Press
↵
.
From this point forward, the screens will be the same as in Table 4-2.
Table 4-5 Programming Example With 750 Module Installed (Continued)