Toshiba 1805 User Manual
Page 217
217
If Something Goes Wrong
Resolving a hardware conflict
The System Properties dialog box appears.
2
Click the Hardware tab.
3
Click the Device Manager button.
4
Double-click the device listed as your PC Card.
The PC Card’s Properties dialog box appears, containing
information about your PC Card configuration and status.
The computer stops working (hangs) when you insert a PC
Card.
The problem may be caused by an I/O (input/output) conflict
between the PCMCIA socket and another device in the system.
Use Device Manager to make sure each device has its own I/O
base address. See
“Fixing a problem with Device Manager” on
for more information.
Since all PC Cards share the same socket, each card is not required
to have its own address.
Hot swapping (removing one PC Card and inserting another
without turning the computer off) fails.
Follow this procedure before you remove a PC Card:
1
Click the PC Card icon on the taskbar.
2
Click Stop xxxx, where xxxx is the identifier for your PC
Card.
A message tells you that you may safely remove the card.
3
Remove the card from the slot.