Toshiba 1805 - Manual (Page 50)

50 Getting Started
Setting up your computer
Inserting the memory module
8 Push the module down until the latches on either side of the
socket engage, securing the module in the socket.
9 Position the memory module cover on the computer and
secure it with the screw.
10 Turn your computer right side up.
11 Reconnect any cables you disconnected.
12 Turn on the computer.
13 Click Start, then click Control Panel to open the Control
Panel.
14 Double-click the System icon to open the System Properties
dialog box.
15 Verify that the amount of RAM listed matches the amount of
memory currently installed.
Removing a memory module
1 Perform steps 1 through 5 in “Installing a memory module”
on page 48 , to access the computer’s memory socket .
2 Release the memory module by gently pressing outward on
the latches on either side of the memory socket.
One edge of the module pops up.