Printer problems – Toshiba 1805 User Manual
Page 218
218
If Something Goes Wrong
Resolving a hardware conflict
The system does not recognize your PC Card or PCMCIA
socket controller.
This problem may be caused by a low battery. Replace the battery
with a fully-charged one or charge the battery fully as follows:
1
Make sure the computer is not in Standby mode. For more
information, see
2
Turn off the computer.
3
Connect the AC adapter and power cable.
4
Keep the computer plugged in for two to three hours with the
power turned off.
If power is not the problem, try removing the card, and reinstalling
it using the procedure in
.
The problem may also be caused by a conflict with any additional
memory in your system. If you recently installed a memory
expansion card, turn off the computer, remove the memory card,
turn on the computer and try the PC Card again.
A PC Card error occurs.
Reinsert the card to make sure it is properly connected.
If the card is attached to an external device, check that the
connection is secure.
Refer to the card’s documentation, which should contain a
troubleshooting section.
Printer problems
This section lists some of the most common printer problems.
The printer will not print.
Check that the printer is connected to a working power outlet,
turned on and ready (on line).