Teac CR-H500NT - Manual (Page 17)

ENGLISH
17
A B
C
A How to turn the unit on or off
Press the STANDBY/ON switch to turn the unit on or
off.
The Standby/On indicator turns blue when the unit is
turned on.
< When you turn on the system, the source that was
selected last time will start playback automatically.
B How to select source
Every time the SOURCE button is pressed, the mode is
changed as follows:
TUNER USB/iPod PHONO
CD AUX2 AUX1
Or press the TUNER, iPod/USB, PHONO, AUX 1/2 or CD
button on the remote control unit to select the source
directly.
Basic Operation (1)
C Adjust the volume
To protect the speakers from a sudden high-volume
sound, gradually turn up the volume to the required
level with the VOLUME knob.
D Muting
To mute the sound temporarily, press the MUTING
button. To cancel muting, press the MUTING button
again or change the volume setting.
E Dimmer
Press the DIMMER button to dim the display.
Press the button again to cancel the dimmer function.
< This function will be cancelled when the unit is turned
off.
Standby/On indicator
EN_CR-H500NT_T_C.indb 17 EN_CR-H500NT_T_C.indb 17 09.10.6 5:31:28 PM 09.10.6 5:31:28 PM