Teac CR-H500NT - Manual (Page 22)

22
Up to 32 tracks/files can be programmed in the desired
order.
1 Press the PROGRAM button in the stop mode.
When CD is selected
P-00 T000
T016 72:00
When USB is selected
P00 T0000
Total File 0130
2 Press the scroll buttons ( Á/ ) to select a track/
file.
When CD is selected
P-01 T002
T016 72:00
When USB is selected
P01 T0012
Total File 0130
Programmed Playback
3 Within 5 seconds, press the PROGRAM button.
When CD is selected
P-01 T012
T016 72:00
When USB is selected
P01 T0012
Total File 0130
< Repeat steps 2 and 3 to programme more tracks/
files.
< If you made a mistake, press the CLEAR button.
The last programmed number will be deleted.
< Up to 32 tracks/files can be programmed. If you
attempt to programme more than 32 tracks/files, “P-
FULL (Programme is full)” is displayed and no more
tracks/files can be programmed.
4 When programming has finished, press the
play/pause button ( y/J) to start programmed
playback.
When the playback of all the programmed tracks/files
has finished, or if the stop button (
H) or the STANDBY/
ON button is pressed, the programme mode will be
cancelled.
< If the unit is disconnected from the power supply, the
programmed contents will be erased.
EN_CR-H500NT_T_C.indb 22 EN_CR-H500NT_T_C.indb 22 09.10.6 5:31:31 PM 09.10.6 5:31:31 PM