Teac CR-H500NT - Manual (Page 50)

50
Setting the Timer
< Adjust the clock before setting the timer.
< Select “Direct mode” before using the iPod for the
timer; otherwise, the iPod will not be played back
when the On time is reached. See page 27.
< When no action is taken for 1 minute, the timer setting
mode will be cancelled.
1 Press the TIME SET button repeatedly until “On
time” is displayed.
“On time” appears on the display, and the “hour” value
blinks.
2 Press the scroll buttons ( Á/ ) to set the hour
value, and press the ENTER button.
The “minute” value blinks.
3 Press the scroll buttons ( Á/ ) to set the minute
value, and press the TIME SET button.
“Off time” appears on the display, and the “hour” value
blinks.
4 Repeat step 2 and 3 to set the Off time.
“Source select” appears on the display.
5 Press the scroll buttons ( Á/ ) to select the
source, and press the ENTER button.
Now the timer setting is stored in memory.
EN_CR-H500NT_T_C.indb 50 EN_CR-H500NT_T_C.indb 50 09.10.6 5:31:46 PM 09.10.6 5:31:46 PM