Searching for your code – Universal Electronics Atlas DVR/PVR 5-Device User Manual
Page 11
www.urcsupport.com
11
ume control (see “Programming Device Con-
trol” starting on page 8).
5.
For future reference, write down each working
device code in the boxes below:
TV/VCR Code
TV Code (if used)
SEARCHING FOR YOUR CODE
If your home entertainment device does not respond to
the Atlas DVR/PVR 5-Device Universal Remote Control
with Learning after trying all of the codes listed for your
brand, or if your brand is not listed at all, try searching
for your code.
For example, to search for a code for your TV:
1.
Turn on your TV.
4.
Aim the remote control at your TV/VCR
Combo and press PWR once. The device
should turn off. If it does not respond, repeat
steps 2 through 3, trying each code listed for
your brand until you find one that works. If it
still does not respond, try searching for the
code (“Searching for Your Code” starting on
page 11).
2.
On the remote control, press TV once; it will
blink once. Then press and hold SETUP until
the TV key blinks twice.
3.
Enter 9 9 1. The TV key will blink twice.
4.
Aim the remote control at the TV and press
PWR once.
5.
Press CH+ one or more times and stop when
the TV turns off.
NOTE:
In the search mode, the remote control will
send IR codes from its library to the selected
device, starting with the most popular code
first.