Universal Electronics Atlas DVR/PVR 5-Device User Manual
Page 8
www.urcsupport.com
8
INSTALLING BATTERIES
1.
On the back of the remote control, push the
tab and lift off the battery cover.
2.
Locate the two (2) enclosed AA batteries.
Match the + and - marks with those in the
battery case, then insert them.
3.
Align the covers keys with the cases holes and
press the cover back into place. The tab should
click when the cover is locked.
NOTE:
When batteries need replacement, the remote
control will cease to operate. Replace the
batteries and the unit will be restored to its
full functionality, complete with your favorite
settings.
PROGRAMMING DEVICE CONTROL
The Atlas DVR/PVR 5-Device Universal Remote Control
with Learning is preprogrammed to operate the cable
box (converter) provided by your cable system, an RCA
TV, a Toshiba DVD player, an RCA VCR (as an AUX
device), and a Pioneer audio receiver. To control devices
other than the default brands, perform the following
steps; otherwise skip this section.
4.
Test the remote control by pressing any mode
key (e.g., TV). If the batteries are inserted
correctly, the LED (red light) will blink once.
❶
❸
❷