Universal Electronics Atlas DVR/PVR 5-Device - Manual (Page 7)

www.urcsupport.com
7
Device Table
NOTE:
Please refer to the table below when
performing the instructions in
“Programming Device Control” on page 8 or
“Programming TV/VCR Combo Control” on
page 10.
After programming, the Atlas DVR/PVR 5-Device
Universal Remote Control with Learning will be able to
control the following types of devices:
Use PIP MOVE to move the window picture
to different positions in the main picture.
Use PIP CH+ (or CH-) to select the next
higher (or lower) PIP channel.
In the CBL mode, use VIDEO SOURCE to
view other video sources (A or B)
instead of cable.
In all other modes, use VIDEO SOURCE
to watch TV or video programs on a
desired device.
For amplifiers/receivers, use VIDEO
SOURCE to select an input source.
Device Key Controls these types of devices
VCR, TV/VCR Combo, PVR (Personal
Video Recorder), or extra DVD Player
DVD Player
Audio Amplifier, Tuner, or Receiver
Television
Cable Box (Converter) or Satellite
Receiver
Key Function