Universal Electronics Atlas DVR/PVR 5-Device User Manual
Page 17
www.urcsupport.com
17
4.
Repeat steps 1 through 3 for each device you
want volume to be unlocked.
Now, after you select a device that has volume unlocked
(e.g., CBL), pressing VOL+, VOL-,or MUTE, will control
only that device’s volume.
Unlocking All Volume Control (Global Volume Unlock)
NOTE:
Performing these instructions will set inde-
pendent volume control for all programmed
devices.
Locking Volume Control To One Mode (Global
Volume Lock)
NOTE:
The audio mode’s volume controls are active
regardless of Volume Lock settings. However,
if you lock the volume controls to the AUD
mode, you will control the audio device’s vol-
ume in all other modes (i.e., AUX, DVD, TV, or
CBL). This can be an advantage if, for exam-
ple, you always listen to home entertainment
devices through your receiver’s speakers.
Now, when you press VOL+, VOL-,or MUTE, the volume of
the selected device (e.g., TV) is controlled regardless of
mode.
3.
Press VOL- once. The last-selected device key
will blink four times.
1.
On the remote control, press and hold SETUP
until the last-selected device key blinks twice.
2.
Enter 9 9 3. The last-selected device key will
blink twice.
3.
Press VOL+ once. The last-selected device key
will blink four times.
1.
On the remote control, press and hold SETUP
until the last-selected device key blinks twice.
2.
Enter 9 9 3. The last-selected device key will
blink twice.
3.
Select a mode (e.g., TV or AUD) which you
want to use to control the volume. The
selected device key will blink twice.