Equipment physical connection, Internet – UTStarcom IAN-02EX User Manual

Page 4

Advertising
background image

Telephone’s Analogue Adapter – UTStarcom iAN-02EX (V1.8.2.17a) – Operating Manual

pag.4

EQUIPMENT PHYSICAL CONNECTION

First of all, you have to make the physical connection of the equipment, following the simple instructions hereafter
included:

Internet

Internet

insert the rj-45 Ethernet cable into the
port ENET port of the iAN-02EX ATA

connect the other end of the cable to the
Ethernet port of your personal computer

connect the analogue telephone to the
ATA’s “PHONE1” port

if you have subscribed a VoIP second
line, connect another analogue telephone
to the ATA’s “PHONE2” port

connect the power adapter provided with
the iAN-02EX to the wall socket

insert the Ethernet cable to the WAN port
of the iAN-02EX ATA

connect the other end of the cable to your
LAN (Hub/Router).

At the end of the connections, the “PWR”, “WAN”, “ENET”, and “VoIP” LEDs will light:

PWR:

Lighted shows that the ATA is powered by the wall

socket.

ENET:

Lighted shows that the “physical” connection

between your PC and the ATA is working correctly.
Blinking when data is being transmitted or received from
or towards your PC.

WAN:

Lighted shows that the “physical” connection

between the ATA and the ADSL modem is working
correctly. Blinking when data is being transmitted or
received:

VoIP:

Lighted shows that you are registered to the VoIP

service of Eutelia and that you can make a calls.

LINE1/2:

Blinking when call is being received or

transmitted.

Advertising