Fagor 6FI-4GLSX - Manual (Page 7)

INSTALLATION
UK 6
 There must not be any cabinet fitted right above the hob.
 In case of mounting a horizontal partition "
A" under the hob, leave the distance at least 150mm
between the hob and the partition (Fig. 6).
Fig. 5 Fig. 6
2.2 GAS HOB INSTALLATION
1. Make the 490 x 560 [mm] rectangular cut-out in the worktop. The dimensions of the cut-out can be
found in Fig. 7.
2. The hob is equipped with a seal with tape-protected adhesive surface. Remove the tape from the
seal.
3. Turn the hob upside down and stick the seal around the internal edge (Fig. 8).
Fig. 7 Fig. 8
4. Place the hob in the middle of the cut-out and push it so that the seal adheres tight to the worktop.
5. Fix the hob with the four brackets which are included together with other connecting parts (Fig. 9 and
10).