Ultra electronic Prima 3 XID590ie - Manual (Page 38)

3.5.5. Card Output
By enabling the "Card Output" option, the user can force or override the default setting of the
printer driver. Independent from speed or material usage settings, the Card Output options "Front
up" or "Front down" will force the card orientation when leaving the printer.
This option should be used only if an external lamination unit is attached to the printer.
3.5.6. Material Usage
The "Material Usage" area shows the expected usage of color and retransfer ribbon using the
currently selected options.
In some rare combinations, the "Save Material" option will become available and lets you enforce
material saving over production speed.
Prima 3 Driver Manual
38