Re-transfer settings, Bend remedy, Ink settings – Ultra electronic Prima 3 XID590ie User Manual
Page 45: Other settings
5.1.1. Re-transfer settings
Ribbon Type
Counts per roll (1000, 750)
Temperature
-3 (Low) ..Standard + 2 (High)
Speed (Front/Back)
-10 (Slow) .. Standard .. +2 (Fast)
5.1.2. Bend remedy
Temperature
Off .. -5 (Low) .. Standard .. 0 (High)
Speed
-2 (Slow) .. Standard .. +2 (Fast)
Cooling Time
0 sec .. 15 sec
Note: Cooling Time is only available if temperature is not Off.
5.1.3. Ink settings
Ribbon Type
YMCK, YMCK + PO, YMCKK
Note: The auto detection function will always show the currently mounted type of color ribbon.
Resin Black
-3 (Thin) .. Standard .. +5 (Thick)
Resin Black Mode
Normal .. Fine
Special Ink: 1/2
(for future use)
-3 (Thin) .. Standard .. +3 (Thick)
5.1.4. Other settings
ISO Type
HiCo or LoCo Magstripe Cards
Card Type
Normal or Cybernetic Size (future use)
Printer Stand By
No .. 60 minutes
Buzzer
On or Off
Prima 3 Driver Manual
45