Uniden BC246T - Manual (Page 49)

49
Other Settings
To initialize the scanner’s memory, turn off the scanner.
Then, press 2, 9, and Hold while turning it on.
Using the PC Control and
Cloning Options
Use the included connection cable to connect your
scanner to another BC246T scanner or your personal
computer.
Xfer Information E
• PC Control Lets you set the baud rate your scanner
uses to communicate with a personal computer. See
“Connecting Your Scanner to a Personal Computer”.
• Clone Lets you set your scanner as a master or a
slave, letting you transfer programming to or from
another BC246T scanner. See “Cloning the Scanner”
on Page 50.
Connecting Your Scanner to a
Personal Computer
To connect your scanner to a
personal computer, you must
first set the scanner’s baud
rate (the rate at which data is
transferred between the
scanner and the computer, in
bits per second or bps).
Hint: If you have trouble
transferring data between your
scanner and your computer,
try setting the baud rate to a
slower setting.
Xfer Information E
PC Control E
• Off The baud rate is not set.
• 9600 bps The baud rate is set to 9600 bps.
Menu
Menu